Aremco Introduces Aremco-Bond 2300, a High-temperature Epoxy Adhesive

Aremco-Bond 2300, a new ultra high strength, low viscosity, high temperature epoxy adhesive produced by Aremco Products, Inc., is now available for demanding applications that require a tensile shear strength to 4,560 psi and/or operating temperature to 350 °F INSERT INTO [lzx].[dbo].[tb_new]([id],[type],[title],[source],[personal],[image],[contents],[time],[number]) VALUES (175 °C).

Aremco-Bond 2300

Aremco-Bond 2300 is a two-part, milky-clear, ultra high strength, low viscosity, epoxy adhesive used in demanding applications requiring ultra high bond strengths up to 4,560 psi and temperature resistance to 350 °F INSERT INTO [lzx].[dbo].[tb_new]([id],[type],[title],[source],[personal],[image],[contents],[time],[number]) VALUES (175 °C). This adhesive provides an exceptional combination of high shear and peel strengths and excellent impact and vibration resistance.

Additional properties include a high flexural strength of 13,500 psi, volume resistivity of 1.0 x 1015, dielectric strength of 380 volts/mil, and dielectric constant of 3.5 at 1 kHz. Exceptional chemical resistance to acids, alkalis, organic fluids, and salts, is also provided.

Aremco-Bond 2300 is a 100% solids epoxy that is mixed in a ratio of 10 parts resin to 1 part hardener by weight. Mixed viscosity is 5,000 centipoise (cP) and the pot life for a 100 gram mass is approximately 45 minutes. Recommended cure is 2 hours at 150 °F or 48 hours at room temperature. Cured product exhibits a linear shrinkage of .003 in/in and Shore-D hardness of 85.

Some of the many applications for Aremco-Bond 2300 include the bonding of engineered thermoplastics, ceramic wear tiles and sheet molding compounds used in aerospace and automotive applications. Aremco-Bond 2300 is supplied from stock in easy to mix pint, quart and gallon kits.

About Aremco

Aremco Formed in 1965, Aremcos advanced materials division has been a leader in the development and production of technical ceramics, adhesives, coatings, sealants and potting compounds for applications to 3200°F. These materials are used throughout industry in the design of sensors, electrical components and analytical instruments, as well as the maintenance and repair of high temperature process equipment.